How to install a flush pull


In this How To video, we will be showing you how to install a flush pull into a timber door.

  • Total Time : 30 Minutes
  • Tools Used : Hammer, Chisel, Measuring tape, Pencil, Drill, 3mm drill bit, Phillips head bit, Safety glasses
  • Difficulty Level : Beginner-Intermediate

Step 1

Watch our video!

Step 2

Measure and mark the width, height and depth of the flush pull ‘recess’.

Step 3

Rebate this part of the door so the plate of the pull sits flush with the surface of the door.

Step 4

Drill pilot holes using a 3mm drill bit.

Step 5

Fix flush pull to the door using a drill or screwdriver and the provided screws.

Step 6

Designed for timber sliding doors, this flush pull will make a smart and welcome addition to your internal bathroom, lounge room doors or various other residential applications.

Pinnacle Hardware is your garage storage expert specialising in innovative and quality storage solutions, garden sheds, pet enclosures, hardware and fasteners. Quality products and value for money – that’s our promise to you! Our range of products are perfect for tradies and DIY enthusiasts alike.